Airconsole: packet capture

Post Requests for new features and product roadmap here

Moderator: sergey

capfaris
Posts: 3
Joined: Sat May 10, 2014 3:26 am

Airconsole: packet capture

Postby capfaris » Sat May 10, 2014 3:33 am

It would be good to have embedded packet capture in Airconsole, sp. For the Ethernet port, captured packet can be saved to a USB flash attached to USB port, tcpdump or similar pcap compliant application can be used, remote pcap would also a good idea for sending the live captures to wireshark or similar applications, a GUI (web) interface for setting up filter is a plus.

capfaris
Posts: 3
Joined: Sat May 10, 2014 3:26 am

Re: Airconsole: packet capture

Postby capfaris » Sun Sep 07, 2014 10:06 am

Over 160 views and no single answer, interesting !!! :)

chris
Posts: 34
Joined: Tue Feb 25, 2014 3:05 am

Re: Airconsole: packet capture

Postby chris » Wed Dec 10, 2014 4:05 am

FYI. Remote packet capture was added as a beta in firmware 2.55.
Here's my post with rough instructions. viewtopic.php?f=12&t=974

simon
Site Admin
Posts: 158
Joined: Mon Jun 06, 2011 2:48 pm

Re: Airconsole: packet capture

Postby simon » Fri Dec 12, 2014 8:50 pm

The packet capture feature in 2.55 is still a bit experimental. The Airconsole CPU is a little underpowered to write at wire rate to a connected USB flash drive, but it can act as a Wireshark remote probe and stream the packet capture data over WIFI network to a PC running Wireshark. More on this in a couple of months (need to finish terminal server code first).


Return to “Feature Requests”

Who is online

Users browsing this forum: No registered users and 29 guests