Airconsole: packet capture
Moderator: sergey
Airconsole: packet capture
It would be good to have embedded packet capture in Airconsole, sp. For the Ethernet port, captured packet can be saved to a USB flash attached to USB port, tcpdump or similar pcap compliant application can be used, remote pcap would also a good idea for sending the live captures to wireshark or similar applications, a GUI (web) interface for setting up filter is a plus.
Re: Airconsole: packet capture
Over 160 views and no single answer, interesting !!! ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
Re: Airconsole: packet capture
FYI. Remote packet capture was added as a beta in firmware 2.55.
Here's my post with rough instructions. viewtopic.php?f=12&t=974
Here's my post with rough instructions. viewtopic.php?f=12&t=974
Re: Airconsole: packet capture
The packet capture feature in 2.55 is still a bit experimental. The Airconsole CPU is a little underpowered to write at wire rate to a connected USB flash drive, but it can act as a Wireshark remote probe and stream the packet capture data over WIFI network to a PC running Wireshark. More on this in a couple of months (need to finish terminal server code first).
Who is online
Users browsing this forum: No registered users and 123 guests