Sun SPARC connect
Posted: Thu Oct 03, 2013 8:21 am
by aivengoff
Hello. I have REDPARK CONSOLE CABLE (C2-RJ45V) and RJ45-DB9 (FEMALE) ADAPTER FOR C2/L2-RJ45 CONSOLE CABLE, but I can't connect to Sun Blade system. Tell me please, how I must resolve this problem?
Re: Sun SPARC connect
Posted: Thu Oct 03, 2013 3:29 pm
by simon
You will need to enable hardware flow control in Get Console that is not enabled by default. See
http://www.idevelopment.info/data/Unix/ ... oles.shtml
Re: Sun SPARC connect
Posted: Thu Oct 03, 2013 9:53 pm
by aivengoff
There is no option Hardware! There are options Hardware (DSR/DTR) and Hardware (RTS/CTS). I tried both. Connections aren't present.
Type of my connection:
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: Hardware (RTS/CTS) or Hardware (DSR/DTR)
Re: Sun SPARC connect
Posted: Sat Nov 02, 2013 9:50 am
by simon
so if that does not work I suspect that the pinouts for your DB9 interface are "Null" rather than straight through and you will need the RJ45-to-DB9 (Null) adaptor
Thank you
Simon Hope