Changing the ip address

Questions, FAQ, Feature Requests and Troubleshooting for Airconsole

Moderator: sergey

richardcove
Posts: 1
Joined: Tue Dec 09, 2014 3:00 pm

Changing the ip address

Postby richardcove » Tue Dec 09, 2014 3:11 pm

Can I change the IP address and use com0com / "air console connect" with windows?
the IP address 192.168.10.1 seems to be hard wired into the windows program

daniel
Posts: 127
Joined: Wed Jul 27, 2011 9:33 am

Re: Changing the ip address

Postby daniel » Thu Jan 22, 2015 8:47 am

I believe if you have mDNS/Bonjour installed then it will auto-detect the actual IP address of your Airconsole if it is different from the default. Check that the Bonjour service is running in Windows

yozz3r
Posts: 16
Joined: Tue Jan 06, 2015 12:09 am

Re: Changing the ip address

Postby yozz3r » Fri Jan 23, 2015 12:28 am

Hi Richard,

You could also try the command line option:-

com2tcp-rfc2217 \\.\COMXX xxx.xxx.xxx.xxx 3696

where XX is one half of the com0com redirect pair. e.g. COM20 used for relay to the AC and COM21 from your terminal app to the AC.

Possibly even write it into a batch job ?

Regards

Y.


Return to “Airconsole”

Who is online

Users browsing this forum: No registered users and 29 guests