Equipment tested to work with Airconsole

[kwok]

1) Brocade SAN switch's RJ45 console port. Connect to the switch's console RJ45 port using the blue cable (RJ45/USB), telnet to the Airconsole's IP at port 3696. Date tested: 12-Sep-2013

2) HP Integrity rx2620 server's inbuilt DB9 male console port (port A). Connect to the server's DB9 console port using the Airconsole's RJ45-to-DB9 (female) null-modem adapter, telnet to the Airconsole's IP at port 3696. Date tested: 12-Sep-2013

3) HP StoreOnce 4430 (basically a Proliant ML370 G6) DB9 male serial port. Connect to the server's DB9 console port using the Airconsole's RJ45-to-DB9 (female) null-modem adapter, telnet to the Airconsole's IP at port 3696 (Baud Rate 9600, 8 data bits, 1 stop bit, Parity None, No Flow Control) . Date tested: 10-Oct-2013

4) HP Procurve 6600-24XG 10Gbe network switch's RJ45 console port. Connect to the switch's RJ45 console port using the blue cable (RJ45/USB), telnet to the Airconsole's IP at port 3696. Date tested: 28-Mar-2014

5) HP Integrity rx2800 i2 server's inbuilt DB9 male console port. Connect to the server's DB9 console port using the Airconsole's RJ45-to-DB9 (female) null-modem adapter, telnet to the Airconsole's IP at port 3696. Date tested: 15-Apr-2014

[simon]

Thanks for the confirmation kwok

[geekwrestler]

I have tested:

Working (RJ45 Cisco Compatible):
Aruba Mobility Controller - 620 and 7210
Aruba AP - 105/135
Palo Alto Networks Firewall - PA-200, PA-500, PA-3020
Cisco Nexus 5548UP
Cisco Fabric Interconnect 6248UP

Working (DB-9 Adaptor)
Array Networks APV/NetVelocity - APV1600
Riverbed Steelhead - SH 1050
Ruckus Zone Director - ZD1000

Not Working
Dell Sonicwall TZ/ NSA Series Firewalls - Orginal console cable uses a DB9-RJ45 Cable with a different pin combo than Cisco.
Dell Sonicwall (Aventail) EX-Series SRA - Same as above

[glugger]

hi geekwrestler
did you ever get your Dell Sonicwall devices working ?

[glugger]

To answer my own issue I have now made up a patch cable as follows which attaches to the supplied airconsole USB blue cable and successfully connects to a Dell SonicWall SRA 4600

RJ45Female RJ45Male
1------------ 7
2------------ n/c
3------------ 5
4------------ 4
5------------ 4
6------------ 6
7------------ 3
8------------ 8

[simon]

Thanks for Sonicwall pinouts glugger
Simon Hope

[Flange_Gasket]

I have used my Airconsole with Clipsal Cbus lighting control. With the correct pinout it works.

[Flange_Gasket]

Works with all AMX Netlinx controllers.

[jaimeesc]

I did get the Dell SonicWALL firewall appliances working with AirConsole using the black RJ-45 to serial converter. I had to also purchase a serial male-male adapter.

AirConsole > Blue Cisco USB to RJ-45 cable > RJ-45 side goes into the black RJ-45 to serial adapter > Serial side goes into the male-male adapter > SonicWALL console cable (serial side) > RJ-45 side of the SonicWALL console cable goes to the firewall.

[Flange_Gasket]

I've tested and it works with a Dynalite DTK622-USB-J lighting interface connected directly to the USB port of the Airconsole V2.50. In EnvisionProject just set the connection setting to an IP connection with the IP of the Airconsole and port number 2167, set the TX delay to 100ms. The Airconsole directly communicates with the Prolific USB/serial adaptor built into the interface.