Re: Airconsole as a 1-port console server
Posted: Fri Jul 12, 2013 3:48 pm
On the Routing->Static page on Airconsole website you can set static routes to route to other subnets so that Airconsole could route back from remote subnets that are connecting into it as a 1 port terminal server. From remote subnets just telnet to the Airconsole's address on port 3696 (as per RFC2217 spec), and you will go straight out serial port with the baud/flowcontrol as specified in the Serial tab on the airconsole website.
The Routing->Static route page unfortunately doesnt let you set a default, only routes like 10.0.0.0/8 etc
The Routing->Static route page unfortunately doesnt let you set a default, only routes like 10.0.0.0/8 etc