Airconsole as a 1-port console server

Questions, FAQ, Feature Requests and Troubleshooting for Airconsole

Moderator: sergey

simon
Site Admin
Posts: 158
Joined: Mon Jun 06, 2011 2:48 pm

Re: Airconsole as a 1-port console server

Postby simon » Fri Jul 12, 2013 3:48 pm

On the Routing->Static page on Airconsole website you can set static routes to route to other subnets so that Airconsole could route back from remote subnets that are connecting into it as a 1 port terminal server. From remote subnets just telnet to the Airconsole's address on port 3696 (as per RFC2217 spec), and you will go straight out serial port with the baud/flowcontrol as specified in the Serial tab on the airconsole website.

The Routing->Static route page unfortunately doesnt let you set a default, only routes like 10.0.0.0/8 etc

Return to “Airconsole”

Who is online

Users browsing this forum: No registered users and 36 guests