Page 1 of 1

COnnect to Cisco 3750-x

Posted: Thu Jan 09, 2014 9:03 am
by dwshula
I am trying to connect to a cisco 3750-x switch.
but the screen is blank
the config are
auto connect -> on
Baud Rate -> 9600
Stop Bit -> 1
Flow Control -> None
Parity -> None
Data Bits -> 8bit

i am using Redpark Console Cable (C2-RJ45V)

Re: COnnect to Cisco 3750-x

Posted: Tue Apr 15, 2014 11:19 pm
by simon
Are you using RapidSSH or Get Console App? RapidSSH works with Airconsole, but it does not work with Redpark cable.