Virtual interface

[kwok]

I'd like to be able to use the Airconsole's web page to configure a virtual interface, so that I can use this interface to connect to an equipment's physical LAN port that's configured with a static IP.

E.g.

My Airconsole's is currently configured with static IP 192.168.10.1, while my equipment's LAN port is configured with 10.255.155.123 (subnet 255.255.255.248). I'd want to connect the Airconsole's wired LAN port to this equipment's LAN port and being to access the 10.255.155.123 IP address.

Normally, I'd connect to such an IP via a cross-cable connection from my laptop's LAN port statically configured as 10.255.155.121.

Is this possible by creating a virtual interface?