2.50 fw update

[gabbife]

hi i've update firmware in my airconsole (2.02?!?)
Firmware Version : 2.50 (2014-08-19 build 527)
Hardware Version : A-01
Host Name : AirConsole-4C
Operating Mode : Bridge
Bridge IP : 192.168.1.200
DNS Servers : 8.8.8.8
to last (2.50) it complete sucess the process.
webpage of airconsole work but the serialbot remain in connecting and if i try to connect wifi-serial 9600-8N1 app crash in galaxy tab 2 7" and galaxy s4 thansk for help

[daniel]

There is an issue using serialbot 1.7.4 and an Android device running 4.3 or less that causes a crash when disconnecting a wifi-serial connection.

This has been fixed in serialbot 1.7.5 which should be released in the Google Play store in the near future.

In the meantime, a work-around is to use the "telnet" connection type and telnet to 192.168.10.1 (or whatever the IP of your Airconsole is) on port 3696

[daniel]

In the example you gave above it would be telnet 192.168.1.200:3696

[daniel]

Serialbot 1.7.5 has been released into the Google Play store - can you please try updating to see if that fixes your issue

[gabbife]

thankyou for response!!!
Serialbot 1.7.5 istalled but if i try to connect, the connection close immediatly
i've "reset to default" the airconsole
if i connect a pc by ethernet and execute "telnet 192.168.10.1:3696 noting appear

[gabbife]

can i downgrade my firmware?!?!

[daniel]

An immediate disconnect sounds like you don't have the serial cable pugged into the Airconsole.

[gabbife]

i never use airconsole without cable so i dont know if is the same behavior
(sorry for my english)
now i've try to run airconsole without usb serial cable, it do the same thing

[gabbife]

thw new firmware work with old usb cable?

[daniel]

It is possible to downgrade the firmware to 2.11 but this is not recommended. 2.11 firmware does not support Bluetooth.

You can email to support@get-console.com for instructions.