get-console.com

hi i've update firmware in my airconsole (2.02?!?)
Firmware Version : 2.50 (2014-08-19 build 527)
Hardware Version : A-01
Host Name : AirConsole-4C
Operating Mode : Bridge
Bridge IP : 192.168.1.200
DNS Servers : 8.8.8.8
to last (2.50) it complete sucess the process.
webpage of airconsole work but the serialbot remain in connecting and if i try to connect wifi-serial 9600-8N1 app crash in galaxy tab 2 7" and galaxy s4 thansk for help

There is an issue using serialbot 1.7.4 and an Android device running 4.3 or less that causes a crash when disconnecting a wifi-serial connection.

This has been fixed in serialbot 1.7.5 which should be released in the Google Play store in the near future.

In the meantime, a work-around is to use the "telnet" connection type and telnet to 192.168.10.1 (or whatever the IP of your Airconsole is) on port 3696

In the example you gave above it would be telnet 192.168.1.200:3696

Serialbot 1.7.5 has been released into the Google Play store - can you please try updating to see if that fixes your issue

thankyou for response!!!
Serialbot 1.7.5 istalled but if i try to connect, the connection close immediatly
i've "reset to default" the airconsole
if i connect a pc by ethernet and execute "telnet 192.168.10.1:3696 noting appear

can i downgrade my firmware?!?!

An immediate disconnect sounds like you don't have the serial cable pugged into the Airconsole.

i never use airconsole without cable so i dont know if is the same behavior
(sorry for my english)
now i've try to run airconsole without usb serial cable, it do the same thing

thw new firmware work with old usb cable?

It is possible to downgrade the firmware to 2.11 but this is not recommended. 2.11 firmware does not support Bluetooth.

You can email to support@get-console.com for instructions.